| Products List |
|
|
| |
 |
|
|
|
Jonway panel is very easy to process.All
cutting,milling, slotting,side-folding and
curving can be easily fulfilled by simple tools
used for processing timber and metal.It can be
shaped into various shapes,such as curve,reserve
curve, curve comer and sharp curve,according to
requirements of building design.It is
incomparalbe for other decorating materials.
Normal aluminum product processing machinery
and wood product processing machinery can be
used for processing of Jonway panel without
special
device. |
|
 Saw cutting
It can be easily
processed with wood product processing saw and
plate saw.It's recommended to use hard alloy
blade |
|
|
| |
Slotting
It's important to make the U type slotting
process with a distance fo 0.2-0.4mm from the
polyethylene substrate.
The recommended slot
angle is 110
(1)milling machine and
trimmer
Use the modified drill as showed in
the left chart.
Running
speed:20000-30000rpm
Feed
speed:3-5m/min
Materal:hard alloy
(2)When
processing large quantity of U type
slots,
it's recommended to use round saw and
belt saw.And the following is an example of
slotter
material:hard alloy flake
outer
diameter:305mm
number of teeth:24
running
speed:3000-5000rpm |
|
|
|
|
|
| |
Bending With panel folder
If operated on the
platform,bending part can be made very
tidy.Platen puncher,plate folder or bending dies
are applied as bending equipment.The recommended
temperature for bending is over 10°c. |
|
|
|
| |
Bending With panel Bender
When plate folder is
used to finish the Jonway panel,dies shall be
placed on with appropriate radius.And the
required parameters of Jonway panel is showed
as
below. |
|
|
|
| |
Bending with 3-roller panel bender
3-roller panel bender is more preferable for
bending of large intemal diameler to plate
folder,beforethe bending,it shall ensure that it
can be manually bent after bending.
|
|
|
|
| |
Riveting
Countersunk rivet can
realize easy joint from one
direction |
|
|
Bolting
Considering from
deformation limit,formul e>2D is the best
calculation way of aperture D anddistance from
hole center to plate
end. |
|
|
|
 |
|
|
